Calibration With The Measuring Cylinder (Measuring Vessel) - Ecolab Elados Pump Rack Betriebsanleitung

6.3

Calibration with the measuring cylinder (measuring vessel)

Fig. 22: Commissioning – calibration
Calibration by actuating the corresponding 3-way valve:
1.
Meter the product into a measuring cylinder.
2.
Measure or weigh the quantity taken.
Place the measuring cylinder (size approx. 1 - 2 L) on the drip pan below
the 3-way valves.
CAUTION!
Make sure that the medium does not splash or overflow, and thus
penetrate into the motors of metering pumps located below the tray.
67
Starting up
417102267 Ver. 04-11.2023