Installation/Securing Against Tipping - Ecolab Elados Pump Rack Betriebsanleitung

Installation
5.3

Installation/securing against tipping

CAUTION!
To avoid the risk of tipping, the Pump Rack stand must be fastened on a wall
with the four supplied wall plugs and fastening screws.
The installation location must have a flat, suitable floor and sufficient work
space in front of and above the appliance. If there is no wall available, the
ELADOS Pump Rack must be fixed to the floor.
1
1
Fig. 5: Installation/securing against tipping
1 Drill holes for wall fastening
2 Splashguard door right
3 Bolt for fastening the two splashguard covers
417102267 Ver. 04-11.2023
4
2
3
5
4 Splashguard door left
5 Back panel
6 Cover plate
44
1
1