Control Unit - Mycontrol - Ecolab Elados Pump Rack Betriebsanleitung

Functional description
4.5 Control unit – MyControl
The pumps connected to the terminal box and thus to the control unit are assigned to a
defined sequence and product category.
The left pump is designed pump no. 1 on the control unit; the pump to its right is then no.
2, etc.
When the control unit receives a metering signal through one of three possible inputs, this
impulse is passed on to the correct metering pump. The pump starts the metering process
independently of the stored washing program parameters. This process continues until the
correct metering volume has been reached. The pump metering action is shown on the
display in addition to the active pump number.
Refer to the technical documentation for the "MyControl" control unit.
NOTICE!
All control operations and parameters are described in the operating
instructions of MyControl, and are not covered by the present Pump Rack user
manual.
Control is provided using the "MyControl" control unit.
For details of how to operate the "MyControl" control unit, see the operating
instructions (article no. 417101970 or 417101971).
Download of operating instructions for "MyControl":
417102267 Ver. 04-11.2023
To download the operating instructions using a tablet or smartphone, you can use
the QR codes provided.
The most recent quick start guide is available on the Internet:
https://www.ecolab-engineering.de/fileadmin/download/bedienungsanleitungen/tcd/
417101970_KurzBA_MyControl.pdf
The latest complete user manual is available on the Internet:
https://www.ecolab-engineering.de/fileadmin/download/bedienungsanleitungen/tcd/
417101971_My_Control.pdf
38