5.7.7.1 Assembling The Manifold Connection; Pulsation Attenuator - Ecolab Elados Pump Rack Betriebsanleitung

5.7.7.1 Assembling the manifold connection

Fig. 13: Assembling the manifold connection
1 Blanking plug
2 Manifold
3 Non-return valve
1.
Unscrew the blanking plug (item 1) from the manifold (item 2).
2.
Screw the threaded socket (item 4) onto the non-return valve (item 3).
3.
Screw the valve into the manifold (item 2).
4.
Screw the male stud coupling (item 5) into the threaded socket (item 4).
5.
Pipe connection procedure:
5.7.8

Pulsation attenuator

Figure
NOTICE!
Tightening torque: 5 Nm
Check the seat of the O-rings.
WARNING: The valve contains loose components.
Ä Chapter 5.7.1 'EMP III pump – 54 l/h' on page 47
Material Connection
PP
Size G 5/4
PVDF
4 Thread socket
5 Male coupling
Misuse Article no.
Alcaline
products
Acidic
products
53
Installation
EBS No.
201535 10025969
201535 10025968
417102267 Ver. 04-11.2023