Intended Use - Ecolab Elados Pump Rack Betriebsanleitung

2.2

Intended use

The system is designed for metering up to 9 different liquid cleaning products in the
respective washer extractors or washing line chambers.
NOTICE!
Proper use also includes compliance with the operating instructions prescribed
by the manufacturer, as well as with the maintenance and servicing conditions.
Before beginning all work and/or operating devices or machines, it is essential
to read and understand these instructions. In addition, always heed all the
instructions relating to the product that are included with the product!
DANGER!
This equipment has been exclusively specified for the purpose mentioned
above. Any other additional extraneous use or a conversion of the equipment
without written discussions with the manufacturer will be considered as being
improper use. The manufacturer is responsible for any resulting damage.
The owner alone bears the risk. The equipment may only be put into operation
when it is ensured that all safety devices have been installed and are
functional.
WARNING!
The dangers due to improper use.
Improper use can lead to hazardous situations:
– Never use other metering media than the specified product.
– Never alter metering instructions of the product beyond permissible range.
– Never use in areas where there is a risk of explosion.
DANGER!
Products which may produce explosive dust/air mixtures may not be processed
with this equipment! Please note that the equipment does not meet any ATEX
prerequisites. It may not be installed in an ATEX zone.
NOTICE!
Application of the European EMC directive 2014/30/EC :
As per DIN EN 61000-6-4 (Generic standard for emitted interference, industrial
sector) the machine / installation may not be installed in a residential area, in
business and commercial areas and in small enterprises, unless it also meets
theDIN EN 61000-6-3standard (emitted interference, residential area).
17
Safety
417102267 Ver. 04-11.2023