Assembling The Conversion Kits - Ecolab Elados Pump Rack Betriebsanleitung

5.8.1

Assembling the conversion kits

1.
To install the connection parts for OGM
Procedure for installing the new connection parts see:
Ä Chapter 5.7.10 'Oval gear meter OGM
2.
Screw the connection nipple hand-tight with previous seals and union nuts.
3.
To install the "suction lance connection set", unscrew the previous hose nozzle of the
suction lance and screw in the new nozzle.
NOTICE!
For assembly of the DFM and dirt trap, replace the previous connection
nipples.
NOTICE!
Tightening torque: 5 Nm
PLUS
, replace the previous connection nipples.
PLUS ' on page 57 , no. 11).
63
Installation
417102267 Ver. 04-11.2023