Description Of Controls; Use And Operation - Angelo Po FX61G 3-3R Bedien- Und Installationshandbuch

INSTRUCTIONS AND WARNINGS FOR USE
Important
– Besides being authorised and appropriately documented,and if necessary,in-
structed and trained, users,on first usage, have to simulate several operations
to identify the controls and main functions.
– Use only as intended by the manufacturer and do not tamper with any devices
to obtain operations other than those intended.
– Before each use, make sure that the safety devices are fully installed and effi-
cient.
– As well as undertaking to comply with these requirements, users must apply
all safety regulations and read the description of the controls and the start-up
instructions carefully.
– Immediately report any anomaly or deterioration of the components and/or
parts of the unit and if necessary ask qualified staff to intervene for the inspec-
tion and/or replacement activities.
– The manufacturer recommends using the oven above 250°C only when strictly
necessary and for short periods of time, not to reduce the life of your equip-
ment.

DESCRIPTION OF CONTROLS

The illustration shows the appliance's control panels, while the list details
the descriptions and functions of the individual controls.
A – Digital display: displays the working parameters and alarm codes.
B – Function enabling button. enables the function shown on the dis-
play.
C – Back button: cancels the current operation and returns to the previ-
ous page.
D – Reset button: resets the alarms (beepers and lights).
E – "START-STOP" button: Starts or ends the selected program cycle,
IT
shown on the display (cooking cycle, washing cycle, etc.).
GB
F – Knob: Used to select the function required or modify values.
To select one of the zones required (function or value) turn the knob clock-
DE
wise or anticlockwise.
- Clockwise: scrolls "downwards" through zones or increases the value
FR
shown.
ES
- Anticlockwise: scrolls "upwards" through zones or decreases the val-
ue shown.
After selecting the function required or the value, press the knob to con-
firm and save the function or value.
G – On/off button: turns the appliance's electricity supply on and off.
H – USB port: used to connect a remote data storage unit to the appli-
ance.
L – HELP button: gives information on the function that is being used.
English

USE AND OPERATION

- 8 -
4
A
B
C
L
D E
F
H G
IDM-39617700300.tif
Use and installation manual