Angelo Po FX61G 3-3R Bedien- Und Installationshandbuch Seite 93

IDENTIFICATION OF MANUFACTURER AND APPLIANCE
The nameplates shown here are fitted directly to the appliance.
One (fig. 1) contains references and all essential information for operating safety, and
the other (fig. 2) the information about the gases for each country of use.
A – Appliance model
B – Type of customisation
C – Manufacturer identification
D – Type of fume exhaust vent
E – Serial number
F – Protection rating
G – EC conformity mark
H – Reference standard
L – EC certificate number
M – Product family type
N – Gas pressure
P – Appliance category
Q – Gas consumption
R – Rated power (kW)
S – Type of gas
T – Testing gas indicator frame
U – Code of country of destination
V – Date of construction
W – Voltage (V)
X – Frequency (Hz)
Y – Rated power (kW)
PROCEDURE FOR REQUESTING SERVICE
For all requirements contact the agents or the headquarters of Angelo Po which can
be found in the contacts section of the website http://www.angelopo.com
Contact one of the authorised service centres for all requirements.
When requesting service, state the data provide on the nameplate and provide a de-
scription of the fault.
English
- 3 -
Use and installation manual
IT
GB
DE
FR
ES