REPLACING THE FUSE
To carry out this operation, proceed as follows.
1 – Undo the screws to remove the side panel (A).
2 – Open the fuse-holder (B) and replace the damaged fuse (C).
3 – Replace the fuse-holder and the side panel when the operation is complete.
CHANGING THE LAMP
To carry out this operation, proceed as follows.
1 – Back off the lamp cover screws (A).
2 – Remove the side panel (B).
3 – Undo the screws and remove the lamp holder (C).
4 – Extract and replace the lamp (D).
Caution - warning
During the procedure, take care not to touch the lamp directly; wear protective
gloves if necessary.
5 – Once the operation has been completed, remount everything.
IT
GB
DE
FR
ES
English
C
B
- 82 -
A
Use and installation manual
IDM-39617702200.tif