Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.2
Machine identification
The following data required for machine identification are stated on the rating plate attached to the front of the
machine frame (Fig. 1 - page 3):
Mafell:
Erika 85 E:
Art.-Nr.:
230 V ~:
50 Hz:
10.9 A (10,0 A - CH):
2400 W (2300 W - CH):
n
1900 – 3800 min
:
-1
0
Nr.:
2002:
In additon, the following information is given on the data label attached to the rear of the machine frame (Fig. 4 -
page 3):
∅
250 - 240 mm /
Spaltkeildicke 2,2 mm:
max. Schnitthöhe 85 mm:
Manufacturer's name
Type designation of the machine
Type-specific identification-number 971601, 971620, 971621
Necessary mains voltage (single phase alternating current)
Necessary mains frequency
Nominal power consumption at 230 V
Power input (nominal load)
Idle speed range of the saw blade
Machine number
Year of construction
Pretection class II
CE-mark to declare conformity with the essential health and
safety requirements according to Annex I of the Machinery Direc-
tive
Only for EU countries
Do not dispose of electric tools together with household waste
material!
In observance of European Directive 2002/96/EC on waste elec-
trical and electronic equipment and its implementation in accord-
ance with national law, electric tools that have reached the end of
their life must be collected separately and returned to an environ-
mentally compatible recycling facility.
∅
Maximum and minimum permissible saw blade diameter
30 mm:
(9 27/32 - 9 7/16 in.) and bore diameter
Thickness of mounted riving knife / splitter (3/32 in.)
max. cutting height with mounted saw blade (3 3/8 in.)
-25-
Werbung
