Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed
Note:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
32 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of identical products must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (Fig. 1 + 11)
1.
Brush drive clutch lever
2.
Throttle
3.
Brush speed lever
3a.
Locking knob
4.
Spark plug connector
4a.
Spark plug
5.
Crank
5a.
Star grip nut / locknut
6.
Mounting bars for snow blade/collecting contain-
er
7.
Guard left/right
7a.
Screw
7b.
Nut
8.
Brushing rollers
8a.
Brush shaft
8b.
Forming disc
8c.
Washer
8d.
Nut
9.
Support wheel
10.
Wheel
11.
Oil drain screw
12.
Gear selector lever
12a. Screw
12b. Nut
13.
Oil dipstick
14.
Pull starter
15.
Swivel bar
15a. Threaded pins
15b. Spring
15c. Washer
15d. Nut
16.
Steering bar
16a. Nut
16b. Fastening pins
17.
Handle
18.
Travel drive clutch lever
19.
Handle for steering bar adjustment
20.
Fuel filler cap
21.
Air filter cover
21a. Air filter
www.scheppach.com
Werbung
