ECOLAB Versatronic Kurz- Betriebsanleitung Seite 103

8 Start-up
Personnel:
WARNING!
Before start-up, make sure that the device has been installed and connected
professionally and in compliance with the installation instructions. Follow the
safety instructions in this description.
CAUTION!
Do not operate the touch screen with sharp or pointed objects, as these can
damage the protective film and the touch screen.
8.1 nitial start-up
1.
Turn on the power supply of the device and wait for it to boot up.
2.
Select the operating language.
3.
Log in as Operator or Master to access the following menu items.
See operating instructions 417102269, chapter 'Login/logoff' .
4.
Set the date and time.
See operating instructions 417102269, chapter 'Date and time' .
5.
Make the necessary basic settings at the user level.
See operating instructions 417102269, chapter 'User level' .
6.
If one or more controls are enabled on the user level, set at the parameter level
controller parameters and setpoints.
See operating instructions 417102269, chapter 'Parameter sets' (control
parameters) and chapter 'Setpoint value' .
7.
Check the hardware functions of the device.
See operating instructions 417102269, chapter 'Function test.'
8.
The device is now ready for operation.
8.2 Functional test
See operating instructions 417102269, chapter 'Functional test' .
n Manufacturer
n Mechanic
n Qualified electrician
n Service personnel
n Specialist
41
Start-up
417102279 Rev. 4-07.2023