Herunterladen Diese Seite drucken

ECOLAB Versatronic Kurz- Betriebsanleitung Seite 112

Vorschau ausblenden Andere Handbücher für Versatronic:

Werbung

Unit menu
10.3.1
Versatronic Standard
Configuration
point
Ch. X description
Ch. X unit
(not for pH or ORP)
Ch. X measurement
type
(only pH and ORP)
Ch. X beg. scaling
(only for
measurements with
standard signal, e.g.
CL, CD, PA etc.)
Ch. X end scaling
(only for
measurements with
standard signal, e.g.
CL, CD, PA etc.)
Ch. X beg. Display
range
Ch. X end display
range
Ch. X AL1 alarm type *Inactive
Ch. X Al1 limit value
Ch. X Al2 alarm type
Ch. X Al2 limit value
Ctr. X controller type
Ctr. X direction of
action
417102279 Rev. 4-07.2023
Selection/configuration
Text box
mS/cm, µS/cm
(for Cr or Ci measurement)
or text field
(for Cl, Cd, PA measurement)
*PH standard
pH antimony
pH ISFET
* Redox (ORP)
ammonia
* = please only select the marked points!
-99999 to 99999
-99999 to 99999
-99999 to 99999
-99999 to 99999
* Min. alarm
* Max. alarm
Alarm window
Alarm window inverted
* = please only select the marked points!
-99999 to 99999
*Inactive
* Min. alarm
* Max. alarm
Alarm window
Alarm window inverted
* = please only select the marked points!
-99999 to 99999
* Off
*Two-point controller
* Three-point controller
* Coarse/fine controllers
Three-point step controller
Cont. controller with positioner
*Continuous controller
* = please only select the marked points!
Direct
(Controller switches on upon
exceeding the nominal value)
Inverse
(Controller switches on when the
nominal value is not met)
50
Explanation
Change channel X
description
Select unit
Select type of
measurement
Assignment of display
value for standard signal
low limit (0/4 mA)
Assignment of display
value for standard signal
upper limit (20 mA)
Setting initial display area 0,0000
Determining the end of the
display area
Enable alarm 1,
set the alarm type
Alarm 1
Set limit
Enable alarm 2
Set the alarm type
Alarm 2 limit value setting 0,0000
Choose the controller type Two-point controller
Choice of control direction Direct
Default
Description
Cr measurement:
µS/cm
Ci measurement: mS /
cm
Cl- measurement: mg/l
pH standard
0,0000
20,000
Cr measurement, Ci-
measurement: 500,00
pH / ORP (redox)
measurement: 14,00
Cl, Cd, PA
measurement: 20,00
Inactive
0,0000
Inactive

Werbung

loading