ECOLAB Versatronic Kurz- Betriebsanleitung Seite 109

After selecting the corresponding user level, the menu
window with the field 'ID input' appears again. Press
the [OK] button to switch to the 'Password input' :
After entering the password and pressing the 'Enter'
button, the log-in process is complete and the logged-
on user level is displayed on the start screen.
If over a certain period of time (factory setting: 300 s) no key is pressed, an
automatic log-out occurs.
10.1.2 Log-off
By pressing the 'Logoff' button (see figure, item 2
respective log-on is reset.
Ä Further information on page 46 the
47
Unit menu
Fig.: Password input
Fig.: Display of the user level
417102279 Rev. 4-07.2023