ECOLAB Versatronic Kurz- Betriebsanleitung Seite 119

Configuration point Selection/configuration
KT X S→ Reset period
for waste water quantity
KT X S→ Reset
threshold Waste water
quantity
10.4 Configuration
See operating instructions 417102269, 'Configuration ' chapter.
10.5 Parameter setting
Here, control variables (parameters) can be set for the unit features.
This includes: Date and time, controller parameters and controller nominal values.
10.5.1 Date and time
The following table explains the parameters for setting the date and time.
Parameter
Date / Time date
Time zone GMT
Daylight savings time change Inactive, automatic
Switch time: month
Switch time: day of the
week
Day of month
Time switch
Switch time: month
Switch time: day of the
week
Day of month
Time switch
In the Ecolab PC setup program, the date and time are set in the online
parameters. See operating instructions 417102269, 'Date and Time' chapter.
Off
Hourly
Daily
Weekly
Monthly
Yearly
Unlimited
0–99999 l
Selection / value
range
Input dialogue Date / Time Setting the current date and time
-720 to +720 min
January-December
Monday to Sunday
First through fourth, last
hh:mm:ss
January-December
Monday to Sunday
First through fourth, last
hh:mm:ss
57
Explanation
Select the time period after
which the count input for the
waste water quantity should be
reset to zero.
If "unlimited" is selected for KT
X S→ Reset time, a numerical
value in litres can be entered
here above which the count
input for the waste water
quantity is reset to zero.
Explanation
Local time offset from GMT
Enable / disable automatic daylight saving time
Month of daylight saving time
Weekday of switch to daylight saving time
Number of the set day of the week for the switch
to summer time in the given month
Time of the switch to summer time
Month of the switch to winter time
Weekday of switch to winter time
Number of the set day of the week for the switch
to winter time in the given month
Time of the switch to winter time
417102279 Rev. 4-07.2023
Unit menu
Default
Unlimited
99999 l