ECOLAB Versatronic Kurz- Betriebsanleitung Seite 67

NOTICE!
Material damage due to improper transport
Transport units can fall or tip over if improperly transported. This can cause
considerable damage.
– Observe symbols and instructions on the packaging
– Unload and transport the transport items carefully
– Only use intended attachment points
– Transport items to the place of use using a suitable means of transport or
lifting equipment.
– Use only approved means of transport
– Do not remove packaging until immediately before installation
DANGER!
Risks when commissioning equipment which has been damaged during
transportation.
Installation or start-up must not take place if any transport damage is detected
when unpacking the system.
Installing/starting up a damaged pump may result in uncontrollable errors,
which may lead to irreparable damage to personnel and/or of the equipment
when using aggressive dosing agents.
Transport inspection
NOTICE!
Check the delivery for completeness and any transport damage.
In case of visible transport damage, proceed as follows:
n Do not accept the delivery or accept it only on a provisional basis.
n Note down the extent of damage on the transport documents or on the carrier's
delivery slip.
n Lodge a complaint.
Claim for any damage as soon as you notice it!
Damage claims can be filed only within the applicable period for complaints.
1.4 Contact
Manufacturer
Ecolab Engineering GmbH
Raiffeisenstrasse 7
D-83313 Siegsdorf
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
Before contacting the manufacturer, we
always recommend that you contact your
sales partner in the first instance.
5
General information
417102279 Rev. 4-07.2023