Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switch off the device, wait until the cutting
device has stopped and remove the battery in
the following cases:
the cutting tool comes into contact with soil,
stones, nails or other foreign objects (
the cutting tool/machine is damaged)
strong operating noise
unusually strong machine vibration
carrying out repair work
performing maintenance and cleaning work
removal of faults (including blocking of knives – hedge
trimmer)
transporting or storing
changing of cutting tool
clamping again the chain (power pruner)
leaving the product (even in case of short-term
interruptions)
Check the machine for possible damage:
Before further use of the machine the safety devices
must be checked carefully for their proper and intended
function. Only operate the device with complete and
correctly attached safety equipment and do not alter
anything on the device that could impair its safety.
Check whether movable parts function perfectly and do
not stick or whether parts are damaged. All parts must
be correctly installed and fulfill all conditions to ensure
perfect operation.
Damaged safety devices and parts must be properly
repaired or exchanged by a recognized, specialist
workshop; insofar as nothing else is stated in the
instructions for use.
Damaged or illegible safety labels have to be replaced.
Do not allow any tool key to be plugged in!
Before switching on, checking always that all tools are
removed.
Store unused equipment in a dry, locked place out of the
reach of children.
Do not carry out repair operations on the machine
other than those described in section "Maintenance
and cleaning" but contact the manufacturer or
authorized customer service centers.
Use only original spare parts and accessories parts.
Accidents can arise for the user through the use of
other spare parts. The manufacturer is not liable for
any damage or injury resulting from such action.
30
Make sure that the cutting tool is free before starting the
check whether
Before starting the engine, make sure that your hands and
Start cutting only when the cutting tool has reached the full
Caution! The cutting tool may after-run. Do not try to
Keep away all body parts from the cutting blades. Do
Make sure that all protective devices and handles are
Carry the hedge shear on its handle with the cutting
Hold the power tool on the insulated handle surfaces as
Persons who work with the power pruner must exhibit on
Persons under the age of 18 may not operate the power
Keep all parts of the body away from power pruner when
Always hold the power pruner with your right hand on
Hold the power tool on the insulated handle surfaces as
Safety instructions –
brush cutter / grass trimmer
engine.
feet are kept at a safe distance to the cutting tool.
rotational speed.
slow down it by the hand.
Safety instructions – hedge trimmers
not attempt to remove cut material or to hold material to
be cut while the cutting tool is in operation. Only
remove jammed material after the unit was switched off.
A single moment of inadvertence when using the hedge
shear may result in severe injury.
attached before using the unit. Never attempt to put into
service an incomplete unit or a unit that was improperly
modified.
tool stopped. Always install the guard when
transporting or storing the hedge shear. A careful
handling of the unit minimises the risk of injury by the cutting
tool.
the cutting blade may come into contact with hidden
power lines. Contact of the cutting blade with a live wire
may apply hazardous voltage to metallic parts of the unit
and cause an electric shock.
Safety instructions – Power pruner
request a training certificate appropriate to the intended
use and be familiar with the use of the power pruner and
personal protective equipment.
pruner.
the chain saw is operating. Before you start the power
pruner, make sure the saw chain is not contacting
anything. A moment of inattention while operating power
pruner may cause entanglement of your clothing or body with
the saw chain.
the rear handle and your left hand on the front handle.
Holding the power pruner with a reversed hand configuration
increases the risk of personal injury and should never be
done.
the saw chain may come into contact with the unit's
mains supply cable. A contact of the saw chain with a live
conductor may apply hazardous voltage to metallic parts of
the unit and cause electric shock.
Werbung
