Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The power pruner is not suitable to cut down trees, sapplings
or shrubs.
Do not use the power pruner for sawing building materials
and plastics.
The power pruner is only suitable for private use in gardens
and allotments.
The power pruner is not suitable for forestry works (pruning
branches in the forest).
Residual risks
Even if used properly, residual risks can exist even if
the relevant safety regulations are complied with due to the
design determined by the intended purpose.
Residual risks can be minimised if the "Safety advices"
and the "Intended usage" as well as the whole of the
operating instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the
equipment.
Warning! This device generates an electromagnetic field
during operation. Such a field may affect active or passive
medical implants under certain circumstances. To reduce the
risk of serious injuries we recommend persons who carry
medical implants to consult their doctor and the
manufacturer of the medical implant before operating this
device.
Health impairment resulting from exposure to hand arm
vibration if the machine is used too long or is not properly
guided and maintained.
Eye injury when failing to wear safety goggles or visor.
Touching live parts of opened electrical components.
Risk of fire
For the brush cutter / grass trimmer:
Risk of injury at fingers and hands by contact with the cutting
tool blade.
Risk of injury at feet by contact with the cutting tool at a non-
covered area.
Stones and soil may be thrown off.
For the hedge trimmer:
Injury by catapulted parts.
Breaking or catapulting of knife pieces.
For the power pruner:
Risk of kickback when touching the guide bar tip with a hard
object.
Risk of injuries of fingers and hands by the tool (saw chain).
Injury by catapulted workpiece parts.
In addition, in spite of all the precautionary measures
taken, non-obvious residual risks can still exist.
28
Vibrations
(hand arm vibrations)
Hand arm vibration max ah = 5.7 m/s²
Measuring uncertainty K = 1.5 m/s²
The indicated vibration emission level has been measured
according to a standardised test method and can be used to
compare power tools.
It can also be used for an initial estimate of the vibration
exposure.
The actual vibration emission level during the use of
the machine may differ from that indicated in the operating
instructions or indicated by the manufacturer.
This may be caused by the following factors to be minded
before and during the use
Proper use of the machine
Correct cutting or machining of material
Proper condition of the machine for use
Use of the correct and sharp cutting tool
Handles and optional anti-vibration handles properly
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks
taken. In this way, the extent of exposure can be considerably
reduced over the entire work time. Minimise the risk caused by
vibrations. Maintain this machine according to the instructions
in the manual. If you intend to use this machine frequently,
contact your local authorised dealer and purchase anti-vibration
accessories if required. Avoid the use of this machine at
temperatures under 10°C. Create a work schedule in order to
minimise vibration exposure.
Safety instructions
Observe the following advices in order to
!
protect yourself and other persons against
possible injuries.
Before starting this device, read and keep
to the following advice. Also observe the
preventive regulations of your professional
association and the safety provisions
applicable in the respective country, in
order to protect yourself and others from
possible injury.
National regulations can restrict the use of
this machine.
Be sure to observe the separately enclosed
!
"General safety notices for battery operated
tools".
Werbung
