Risidual Risks; Safety Instructions - ATIKA GHB 760 Bedienungsanleitung

R i s i d
R i s i
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety instructions" and
the "Normal intended use" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
Risk of injuries when protective devices which are secured
so that they can only be removed with a tool are removed
while the machine runs.
Risk of injury to the fingers and hands, if your hand grasps
through an opening and reaches the blade unit.
Risk of injury to the fingers and hands, when carrying out
assembly work and cleaning on the blade unit.
Injury by the chopped material spinning away near the
hopper.
Electric shock when touching the spark plug connector
while the engine runs.
Burning when touching hot parts.
Carbon monoxide poisioning when using the device in
closed or poorly ventilated rooms.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
S a f e t y
S a f e t y
Before starting this device, read and keep to the following
advice. Also observe the preventive regulations of your
professional association and the safety provisions applicable in
the respective country, in order to protect yourself and others
from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Repair works on the safety cut out must be carried out by
the manufacturer or by companies appointed by the
manufacturer respectively.
Make yourself familiar with the equipment before using it,
by reading and understanding the operating instructions.
Do not use the machine for unsuitable purposes (see
'Normal intended use' and 'Working with the garden
shredder').
Provide a safe standing position and keep at any time the
balance. Do not lean forward. When placing material into
the shredder, always stand on the same level as the
machine.
u a l r i s k s
d u a l r i s k s
i n s t r u c t i o n s
i n s t r u c t i o n s
Be attentive. Be careful what you do. Behave sensibly
when working. Do not use the device when you are tired or
under the influence of drugs, alcohol or medicaments. One
moment of carelessness when using the device can result
in serious injuries.
Wear protective goggles, gloves and noise protection while
working with the machine.
Wear suitable work clothes:
− do not wear loose-fitting clothes
− slip-proof shoes
Within his area of work the operator is responsible for third
parties.
The machine must not be operated by children or young
people under 16 years of age.
Keep children away form machine.
Never operate the machine if other persons are in the
immediate vicinity.
Never leave the device unattended.
Keep your workplace in an orderly condition! Untidiness
can result in accidents.
Choose a working position alongside the equipment or
behind it. Never stand near the ejection opening.
Never reach into the filling or ejection opening.
Keep your face and body away from the filling opening.
Do not overload the machine! You work better and safer in
the given performance range.
Be sure to operate the product with sharp knives or beaters
- this will reduce the risk of kickbacks.
Only operate the machine with complete and correctly
attached safety equipment and do not alter anything on the
machine that could impair the safety.
Only start shredding when the petrol engine has reached its
max. speed.
Do not alter the revolution speed of the engine, since this
controls the safe maximum operating speed, and protects
the engine and all rotating parts against damage due to
excess speed.
Do not operate without the funnel.
Do not modify the device or parts of the device
respectively.
Close machine properly before enabling engine.
Do not wash down device with water.
Take into consideration environmental influences:
Do not use the device in moist or wet ambience.
−
Do not leave the machine standing in the rain or use
−
when raining.
Do only work with sufficient visibility conditions. Provide
−
for good illumination.
To prevent danger of injury to fingers during assembly or
cleaning operations wear protecting gloves.
Stop the machine and remove the spark plug connector
when
maintenance and cleaning
−
eliminating faults
−
carrying out repair works
−
transport and storage
−
changing the blades
−
leaving the garden shredder (even in case of short-term
−
interruptions)
15