Sachs Bikes MadAss Reparaturanleitung Seite 89

CYLINDER HEAD / VALVES
CYLINDER HEAD REMOVAL
Remove the muffl er (1).
Remove the intake manifold bolts (2) from cylinder head.
Remove the following:
- cam sprocket
- cylinder head nuts and cylinder head bolt.
- cylinder head cover and gasket.
- cylinder head.
CYLINDER HEAD DISASSEMBLY
Remove the two bolts, right side cover and gasket.
Screw an 8 mm bolt into the thread end of the rocker arm shaft
and pull out the rocker arm shaft.
Remove the rocker arms.
86
2
1