Sachs Bikes MadAss Reparaturanleitung Seite 127

CLUTCH/GEARSHIFT LINKAGE
RIGHT CRANKCASE COVER REMOVAL
4
Drain the oil from the engine.
Support the motorcycle using a safety stands and remove the
2
side stand with the footrest by removing the four bolts (1).
3
Disconnect the clutch pull cable (2).
Remove the kick starter pedal (3).
Remove eight screws and take off the right crankcase cover
(4).
1
5
7
Remove the gasket (5) and two dowel pins (6).
6
8
CLUTCH REMOVAL
Remove the clutch outer cover (7) by removing the four screws
8
(8).
Straighten the lock washer tab (9).
Hold the clutch outer with a clutch holder.
9
TOOL:
Crownnut wrench P14649941920000
10
Remove the lock nut (10) with a lock nut wrench and extension
11
bar.
Remove the plain washer and lock washer.
Remove the clutch assembly (11).
124