Sachs Bikes MadAss Reparaturanleitung Seite 71

FUEL SYSTEM
Pull out the fl oat arm pin (1) and remove the fl oat (2) and fl oat
valve (3).
FLOAT VALVE/FLOAT INSPECTION
Inspection seating surface of the fl oat valve (3) for wear or
damage.
Inspect the fl oat valve for grooves and nicks, and replace if
necessary.
Check the Operation of the fl oat valve.
Check the fl oat for damage and fuel in fl oat.
Remove the main jet (4).
Remove the pilot jet (5).
Turn the air screw (6) in and record the number of turns before
it seats lightly.
CAUTION
Damage to the air screw seat will occur if the screw is
tightened against the seat.
Remove the air screw, and the throttle stop screw (7).
Clean all disassembled parts with solvent and dry them.
Inspect the air screw and each jet and replace them if they are
worn or damaged.
68
2
3
1
4
5
7
6
5
1
3
2
4