Sachs Bikes MadAss Reparaturanleitung Seite 187

ELECTRICAL SYSTEM
Changing the bulbs
Indicator lamps
NOTE
For changing the bulbs an opening of the glass cover (1) is not
required.
Do not touch the bulbs with your bare hands. Use a clean, dry
cloth for installation and removal.
Front
- Pull the light case (2) carefully out of the handlebar and hold
the thread bolt (3) with a pair of pliers.
- Release the light case.
- Push the bulb (5) back and release it by turning to the left.
Take the bulb out.
Rear
- Release the nut (4) and hold the thread bolt (3) with a pair of
pliers.
- Release the light case (2).
- Push the bulb (5) back and release it by turning to the left.
Take the bulb out.
- Installation is in reverse order to removal.
Indicator bulbs front/rear:
184
12 V/21W
1
2
3
2
5 3
3
4