Sachs Bikes MadAss Reparaturanleitung Seite 69

FUEL SYSTEM
Route the throttle cable end through the carburetor top.
Install the throttle valve spring.
Connect the throttle cable to the throttle valve.
Install the throttle valve in the carburetor by aligning the throttle
valve groove with the throttle stop screw.
Perform the following adjustments:
- Throttle grip free play
- Carburetor idle speed
CARBURETOR REMOVAL
WARNING
Gasoline is extremely fl ammable and is explosive under
cer-tain conditions. Work in a well ventilated area. Do not
smoke or allow fl ames or sparks in the work area or where
gasoline is stored.
Wipe up spilled gasoline at once.
Turn the fuel chock OFF and remove the hose.
Remove the carburetor top and throttle valve.
Loosen the drain screw to drain the fuel from the carburetor.
Loosen the air cleaner connecting tube band.
Remove the carburetor mounting bolts and carburetor.
DISASSEMBLY
Remove the air vent and drain tubes.
Remove the fl oat chamber by removing four screws (2).
66
(1) THROTTLE CABLE
(2) THROTTLE VALVE
(1) THROTTLE VALVE
(3) GROOVE
(2) THROTTLE STOP SCREW
(1) MOUNTING SCREWS
(1) FLOAT CHAMBER
2
2
2
2