Fuel Cock - Sachs Bikes MadAss Reparaturanleitung

FUEL SYSTEM
Removing/installing the fuel cock
Removing the fuel cock
- Turn the fuel cock on position RES.
- Open the seal and drain the fuel tank
- Loosen the hose clamps (3) and pull off the fuel hose (4).
- Remove the fuel cock.
- Clean the sieve (5).
Installing the fuel cock
NOTE
Check the sealing rings (6 and 7) and replace if necessary.
- Reassemble in reverse order.
76
completely.
ON
RES
1
3
4
7
6
5
OFF
2