Sachs Bikes MadAss Reparaturanleitung Seite 165

TRANSMISSION / CRANKSHAF T/ KICK STARTER
CRANKCASE BEARING REPLACEMENT
Right Crankcase
Drive out the mainshaft bearing from the outside.
Drive a new bearing into the place.
TOOLS:
Driver
Attachment, 37 x 40 mm
Pilot, 17 mm
Left Crankcase
Remove the oil seal and drive out the countershaft bearing.
Drive a new bearing into the left crankcase.
TOOLS:
Driver
Attachment, 37 x 40 mm
Pilot, 17 mm
Apply grease to the lip of a new oil seal and install it in the
crankcase.
NOTE
Align the top of the oil seal with the crankcase. Do not allow the
seal to contact the bearing.
TRANSMISSION ASSEMBLY
Install the right and left shift forks onto the gearshift drum.
Insert the guide pins and guide pin clips.
162