Sachs Bikes MadAss Reparaturanleitung Seite 135

CLUTCH/GEARSHIFT LINKAGE
Primary Drive Gear/Center Guide
Check the primary drive gear and the center guide for wear or
damage.
Inspect the primary drive gear I.D. and the center guide O.D.
SERVICE LIMITS:
Primary drive gear I.D.: 21.05 mm
Center guide O.D.: 20.90 mm
Clutch Spring
Measure each clutch spring free length.
SERVICE LIMIT: 17.5 mm
CLUTCH ASSEMBLY
Install the four clutch springs (1) on the clutch outer.
NOTE
Coat the clutch discs with lightweight engine oil before
assembling.
Assemble the drive plate (2) with the friction discs (3), clutch
plates (4) and the clutch center (5).
132
1
1
1
2
4
5
3
3
1
4