Camshaft Installation - Sachs Bikes MadAss Reparaturanleitung

CYLINDER HEAD / VALVES

CAMSHAFT INSTALLATION

(1) INDEX MARK
Rotate the fl ywheel counterclockwise and align the "T" mark
with the index mark.
(2) "T" MARK
Coat the camshaft and camshaft bearings with clean engine
oil.
While holding the rocker arms out of the way, install the
camshaft into the cylinder head with the cam lobes facing the
piston.
Install the dowel pin into the camshaft.
Align the "O" mark on the cam sprocket with the index mark
on the cylinder head.
Install the cam chain over the sprocket.
Tighten the cam sprocket bolts.
TORQUE: 9 Nm
104