Sachs Bikes MadAss Reparaturanleitung Seite 169

TRANSMISSION / CRANKSHAF T/ KICK STARTER
CRANKCASE ASSEMBLY
Install the kick starter.
Install the crankshaft.
Install the dowel pins and a new gasket.
Install the right crankcase on the left crankcase.
Tighten the crankcase bolts securely in a crisscross pattern in
two or more steps.
Install the moving contact (1) and shift drum bolt (2).
Tighten the bolt.
TORQUE: 12 Nm
Check the O-ring (3) and replace if necessary.
Install the neutral switch (4) carefully and fi x with the plate and
screw (5).
TORQUE: 10 Nm
Install the kick starter spring and spring retainer onto the kick
spindle.
Hook the return spring to the right crankcase as shown.
Install the circlip onto the kick spindle.
Reassemble the removed parts in the reverse order of
removal.
166
5
2
1
4
3