Sachs Bikes MadAss Reparaturanleitung Seite 163

TRANSMISSION / CRANKSHAF T/ KICK STARTER
SHIFT DRUM/ FORK DISASSEMBLY
Pull out the guide pin clips and the shift fork guide pins.
Remove the shift forks from the shift drum.
NOTE
Mark the right and left shift forks to ensure correct assembly.
Straighten the tab and remove the neutral switch rotor.
INSPECTION
Check the gearshift drum for wear or damage.
Measure the gearshift drum O.D.
SERVICE LIMIT: 33.93 mm (1.336 in)
Check the guide pins and shift forks for wear or damage.
Measure the shift fork I.D.
SERVICE LIMIT: 34.14 mm (1.344 in)
Measure the shift fork claw thickness.
SERVICE LIMIT: 4.60 mm (0.181 in)
TRANSMISSION BEARING INSPECTION
Turn the races of each bearing with your fi nger.
The bearing should turn smoothly and quietly.
Also check that the bearing outer race fi ts tightly in the
crankcase.
Remove and discard the bearing if the races do not turn
smoothly, quietly, or if they fi t loosely in the crankcase.
160