Display Of Information; Safety Instructions; Symbols; Designations - Bosch Rexroth PSI 6 C Serie Typspezifische Anleitung

50/91 Bosch Rexroth AG
Regarding this Documentation
Rexroth PSI6xxx
UI regulation and monitoring
Rexroth BOS6000 Messages
Rexroth BOS6000 Online Help
1.3

Display of information

In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1

Safety instructions

For safety instructions refer to Tab. 1: Required and supplementary
documentation Rexroth PSI6xxx Weld timer with Medium-Frequency Inverter
Instructions and Rexroth Weld Timer Safety and user information.
1.3.2

Symbols

The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3

Designations

This documentation uses the following designations :
Designation
Tab. 3:
Designation Meaning
BOS 6000 Bedienoberfläche Schweißen (Welding Software)
FQF
Force quality Factor. Value for the welding quality, derived from the
characterisitic of the counterforce to the electrodes during a weld.
KSR
Constant current regulation
PSF
Prozess stability
PSG xxxx
Medium-Frequency Welding Transformer 1000Hz
XQR
UI control module
STC TEACH Sheet Thickness Combination, teaching
VCP
Small Operator Terminal
R911174319 | PSI6xCx.789xx
1070 087072 Description of
application
R911370296 Reference
1070 086446 Reference