1. Safety instructions
1.12
Residual risks
Residual risk
Life cycle assembly, malfunction, troubleshooting, repair, maintenance
Electric shock due to defective connection
cable
People slipping due to floor contamination
with spilled/ leaked lubricant
Tearing/ damage to lines when installed on
moving machine components
Life cycle start-up, operation
Electric shock due to defective connec-
tion cable
Lubricating oil spraying out due to faulty
component fitting/line connection
Life cycle adjustment, shutdown, disposal
People slipping due to floor contamination
with spilled/ leaked lubricant
Remedy
• Check connection cable for damages
• Exercise caution when connecting the product's hydraulic connections
• Promptly apply suitable binding agents and remove the leaked/ spilled lubricant.
• Follow operational instructions for handling lubricants and contaminated parts
• If possible, do not install on moving parts; if this cannot be avoided, use flexible hose
lines.
• Check connection cable for damages
• Tighten all components securely or using the specified torques. Use hydraulic con-
nections and lines suitable for the indicated pressures. These must be checked for
proper connection and for damage prior to commissioning.
• Exercise caution when disconnecting the product's hydraulic connections
• Promptly apply suitable binding agents and remove the leaked/ spilled lubricant
• Follow operational instructions for handling lubricants and contaminated parts
EN
1
13