Input Select - Yamaha RX-V2600 Bedienungsanleitung

Input Select

Use this feature to reassign digital input/outputs, select the
input signal, rename the inputs, or adjust the level of the
signal input at each jack.
Choices: TUNER, PHONO, CD, CD-R, MD/TAPE, DVD,
DTV, CBL/SAT, VCR1, DVR/VCR2,
V-AUX, MULTI CH
Note
Some parameters described below may not be available for all
input sources and some parameters are only available for specific
input sources.
Input source
TUNER
PHONO
CD
CD-R
MD/TAPE
DVD
DTV
CBL/SAT
VCR1
DVR/VCR2
V-AUX
MULTI CH
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
The top display appears.
AMP
SOURCE
TV
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
Parameter
Volume Trim
Rename
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
Audio Select
Decoder Mode
Volume Trim
Rename
Volume Trim
Multi CH Assign
GUI TOP
TITLE
BAND
Sound
Video
Basic
Option
2
Select Input Select and then press h.
Stereo/Surround
Input Select
Manual Setup
Auto Setup
3
Select the desired input source (CD, DVD,
etc.) and then press h to access and adjust.
■ Volume Trim (Volume trimming)
You can adjust the level of the signal input at each jack.
This is useful if you want to balance the level of each input
source to avoid sudden changes in volume when switching
between input sources.
Manual Setup > Input Select > input source (DVD, etc.) >
Volume Trim >
Control range: –6.0 dB to +6.0 dB
Audio Select
Decoder Mode
Volume Trim
Rename
Note
You can only adjust the volume for the current input source using
this setting.
SYSTEM OPTIONS
CD-R
MD/TAPE
DVD
DTV
CBL/SAT
0.0dB
73