Input Select - Yamaha RX-V3900 Bedienungsanleitung

Graphical user interface (GUI) menu

Input Select

Use this menu to adjust the parameters of each input
source.
y
To customize the input source settings, press 0SUBMENU to
turn on the submenu after you select the input source.
Input source
iPod
USB
PC/MCX
NET RADIO
TUNER
MULTI CH
PHONO
CD
TV
MD/CD-R
BD/HD DVD
DVD
CBL/SAT
DVR
VCR
VIDEO AUX
Bluetooth
■ Audio Select (Audio input jack selection)
Use this feature to select the type of the input jack you
want to use.
Choice
Auto
Automatically selects input signals in the
following order:
(1) HDMI
(2) Digital signals
(3) Analog signals
HDMI Selects only HDMI signals. When HDMI
signals are not input, no sound is output.
Coax/Opt Automatically selects input signals in the
following order:
(1) Digital signals input at the COAXIAL
jack.
(2) Digital signals input at the OPTICAL
jack.
When no signals are input, no sound is
output.
Analog Selects only analog signals. If no analog
signals are input, no sound is output.
y
• You can also select the audio input jack by pressing DAUDIO
SELECT (or OAUDIO SEL) (page 37).
• You can set the default audio input jack select of this unit by
using "Audio Select" in "Initial Set" (page 88).
74
En
Parameter
Volume Trim
Volume Trim
Multi CH Assign
BGV
Audio Select
Decoder Mode
Volume Trim
Volume Trim
Pairing
Connect
Functions
Note
This feature is not available if no digital input jack is assigned
to the selected input source in "I/O Assignment" (page 86).
"HDMI" is available only when an HDMI input jack is
assigned.
■ Decoder Mode (Decoder mode)
Use this feature to switch the decoder mode.
Choice
Auto Automatically detects digital audio signal
input types and selects the appropriate
decoder.
DTS Activates the DTS decoder when digital
audio signals are input.
Note
"Decoder Mode" is available only when the digital audio input
jacks (HDMI, OPTICAL and/or COAXIAL) are assigned to the
selected input source.
■ Volume Trim (Volume trimming)
Use this feature to adjust the level of the signal input at
each input source. This feature is useful if you want to
balance the level of each input source to avoid sudden
changes in volume when switching between input sources.
Control range: –6.0 dB to +6.0 dB
Initial setting: 0.0 dB
y
This parameter also affects the signals output at the ZONE OUT
jacks.
■ Multi CH Assign
(Multi channel assignment)
Use this feature to set the direction of the signals input
into the center, subwoofer and surround channels when a
source component is connected to the MULTI CH INPUT
jacks.
Input Channels (Input channels)
Use this setting to select the number of channels input
from an external decoder (page 22).
Choice
6ch Select "6ch" the connected component
outputs discrete 6-channel audio signals.
8ch Select "8ch" the connected component
outputs discrete 8-channel audio signals.
Also set "Front Input" (see below) to the
analog audio jacks at which the front left
and right channel signals output from the
connected component are input.
Note
Depending on the settings of the zone configuration, no sound
is output at the surround back speakers even if you set "Input
Channels" to "8ch". In this case, select "6ch" and set the audio
output setting of the source component to 6 channels.
Functions
Description