Enjoying 2-Channel Software In Surround - Yamaha RX-V2600 Bedienungsanleitung

■ Enjoying 2-channel software in surround

Signals input from 2-channel sources can also be played
back in multiple channels.
1
Set AMP/SOURCE/TV to AMP and then press
STANDARD on the remote control to switch
between the Surround and Enhanced
programs.
AMP
SOURCE
TV
You can also press MOVIE or THX on the remote
control to select the MOVIE THEATER or THX
programs.
MOVIE
4
2
Press SELECT on the remote control to
select a decoder.
SELECT
7
You can select a decoder from the following list
depending on the type of software you are playing
and your personal preference.
Decoder types for the Surround program
<PRO LOGIC>
Dolby Pro Logic processing for any sources.
<PL x Movie> I I
Dolby Pro Logic x processing for movie software.
<PL x Music> I I
Dolby Pro Logic x processing for music software.
<PL x Game>
I I
Dolby Pro Logic x processing for game software.
<Neo:6 Cinema>
DTS processing for movie software.
<Neo:6 Music>
DTS processing for music software.
STANDARD
6
THX
5
or
Decoder types for the Enhanced, MOVIE
THEATER or THX program
<PRO LOGIC>
Dolby Pro Logic processing for any sources.
<PL x Movie> I I
Dolby Pro Logic x processing for movie software.
<Neo:6 Cinema>
DTS processing for movie software.
y
• You can also select a decoder by using Decoder Mode in Input
Select (see page 75).
• You can also select a decoder by pressing l / h on the remote
control when the decoder type is displayed in the short message
display.
Note
The Pro Logic x decoder automatically changes to the
Pro Logic decoder when Surround Back is set to None
(see page 84).
PLAYBACK
41