Herunterladen Inhalt Inhalt Diese Seite drucken

Changing Parameter Settings - Yamaha RX-V2600 Bedienungsanleitung

Av receiver
Vorschau ausblenden Andere Handbücher für RX-V2600:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 258
SYSTEM OPTIONS

Changing parameter settings

Use the remote control to access and adjust each
parameter. (Speaker set is used in the following example
to change parameter settings.)
Manual Setup > Basic > Speaker Set >
+
TV VOL
TV MUTE
1
GUI TOP
TITLE
BAND
RETURN
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
The top display appears.
AMP
SOURCE
TV
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
2
Press k / n repeatedly to select a menu and
then press h to enter the selected menu.
Test Tone
Speaker Set
Speaker Distance
Speaker Level
Front
Center
Surround
Surround Back
Presence
72
AMP
+
+
1
SOURCE
CH
VOLUME
TV
TV INPUT
MUTE
PRESET
EXIT
PURE DIRECT
5
MENU
NIGHT
2-4
ENTER
AUDIO
A/B/C/D/E
STRAIGHT
DISPLAY
EFFECT
GUI TOP
TITLE
BAND
Sound
Video
Basic
Option
Front
Center
Surround
Large
Small
None
3
Press k / n repeatedly to select the
parameter you want to adjust.
Presence
Bass Out
Bass Cross Over
SWFR Phase
4
Press ENTER or h and then press k / n
repeatedly to change the setting of the item
you want to adjust.
Presence
Bass Out
Bass Cross Over
SWFR Phase
5
Press EXIT.
y
If you want to continue adjusting parameter settings, press
ENTER to return to the previously selected menu item.
Notes
• The available parameters may be displayed on more than one
page of the GUI display. To scroll through pages, press k / n.
• You cannot change parameter values when Memory Guard is
set to "On". If you want to change the parameter values, set
Memory Guard to "Off" (see page 91).
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cable is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the parameter values will return to the
factory settings. If this happens, edit the parameter
value again.
40Hz
60Hz
80Hz (THX)
90Hz
100Hz
40Hz
60Hz
80Hz (THX)
90Hz
100Hz

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis