System Memory - Yamaha RX-V2600 Bedienungsanleitung

SYSTEM OPTIONS
■ HDMI Set (HDMI settings)
Use to adjust the HDMI support audio.
Decoder Mode
Memory Guard
HDMI Set
Support Audio (Support audio)
Use to select whether to play back HDMI audio signals on
this unit or on another HDMI component connected to the
HDMI OUT jack on the rear panel of this unit.
Choices: RX-V2600, Other
Support Audio
• Select "RX-V2600" to play back HDMI audio signals
on this unit. The HDMI audio signals input at the
HDMI IN jacks of this unit are not output to the HDMI
component connected to the HDMI OUT jack on the
rear panel of this unit.
• Select "Other" to play back HDMI audio signals on
another HDMI component connected to the HDMI
OUT jack on the rear panel of this unit.
Note
The HDMI video signals input at the HDMI IN 1 or HDMI IN 2
jack of this unit are always output at the HDMI OUT jack of this
unit.
92
Support Audio
RX-V2600
Other

System Memory

This feature allows you to save up to six of your favorite
settings that can be easily recalled when needed. You can
save settings such as the following:
• Sound field program parameters
• Speaker settings
• Speaker channel settings
• LFE level
• Dynamic range settings
• Parametric equalizer settings
■ To save settings
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
The top display appears.
AMP
SOURCE
TV
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
2
Press k / n on the remote control repeatedly
to select System Memory and then press h.
3
Select Save and then press ENTER.
Current
Memory 1
Memory 2
Current displays the current settings of this unit.
4
Press k / n on the remote control repeatedly
to select the memory number under which
you want to save settings and then press h.
"Save: ENTER" appears in the bottom right corner of
the window.
5
Press ENTER to save settings.
GUI TOP
TITLE
BAND
Sound
Video
Basic
Option
Sci-Fi
Speaker A:ON B:OFF
SpeakerCH 3/4/0.1
LFE Level 0dB
D-Range MAX
PEQ Reset