Information On Cables And Jacks Used For Connections; Cable Indications - Yamaha RX-V2600 Bedienungsanleitung

CONNECTIONS
Information on cables and jacks
used for connections
CAUTION
Do not connect this unit or other components to the main
power until all connections between components are
complete.

■ Cable indications

For analog signals
left analog cables
right analog cables
For digital signals
optical cables
coaxial cables
For video signals
video cables
S-video cables
For HDMI signals
20
■ Analog jacks
You can input analog signals from audio components by
connecting audio pin cables to the analog jacks on this
unit. Connect red plugs to the right jacks and white plugs
to the left jacks.
■ Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
signals input at the COAXIAL jack. All digital input jacks
are compatible with 96-kHz sampling digital signals.
L
R
Note
This unit handles digital and analog signals independently. Thus
audio signals input at the analog jacks are only output at the
O
analog OUT (REC) jacks. Likewise, audio signals input at the
C
digital (OPTICAL or COAXIAL) jacks are only output at the
DIGITAL OUTPUT jacks.
V
S