SYSTEM OPTIONS
Manual Setup (Sound)
Use this menu to adjust the sound parameters.
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
AMP
SOURCE
TV
2
Press k / n on the remote control to select
Manual Setup and then press h.
PRESET
ENTER
A/B/C/D/E
3
Press k / n on the remote control to select
Sound and then press h.
PRESET
ENTER
A/B/C/D/E
Sound
Video
Basic
4
Select the desired parameters and then press
h to access and adjust.
76
GUI TOP
TITLE
BAND
PRESET
ENTER
A/B/C/D/E
PRESET
ENTER
A/B/C/D/E
LFE Level
Dynamic Range
Parametric EQ
Tone Control
Audio Option
PRESET
ENTER
A/B/C/D/E
■ LFE Level (Low-frequency effect level)
Use to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
To access these parameters, select:
Manual Setup > Sound > LFE Level >
Control range: –20.0 to 0.0 dB
Control step: 1 dB
Speaker
Headphone
Speaker (Speaker low-frequency effect level)
Select to adjust the speaker LFE level.
Headphone (Headphone low-frequency effect
level)
Select to adjust the headphone LFE level.
Note
Depending on the settings of LFE Level, some signals may not be
output at the SUBWOOFER jack.
0.0dB