Yamaha RX-V2600 Bedienungsanleitung Seite 47

■ Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
The top display appears.
AMP
SOURCE
TV
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
2
Press n repeatedly to select Signal Info. and
then press h.
PRESET
ENTER
A/B/C/D/E
3
Press l / h repeatedly to select Audio Info.
or Video Info..
The following information appears.
PRESET
ENTER
A/B/C/D/E
GUI TOP
TITLE
BAND
Sound
Video
Basic
Option
PRESET
ENTER
A/B/C/D/E
Auto Setup
Audio Info. Video
Format - - -
System Memory
Sampling
48kHz
Channel ???
Signal Info.
Bitrate - - -
Dialogue - - -
Language
Flag1 - - -
Flag2 - - -
Auto Setup
Video Info. Audio
HDMI Signal
System Memory
- - - - - -
HDMI Resolution
Signal Info.
- - - - - -
Language
Analog Resolution
480i 480i
Audio Info. (Audio information)
Format
Signal format display. When the unit cannot detect a
digital signal, it automatically switches to analog
input.
Sampling
Sampling frequency. When the unit is unable to
detect the sampling frequency "?" appears.
Channel
Number of source channels in the input signal. For
example, a multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is displayed
as "3/2/0.1".
Bitrate
Bit rate. When the unit is unable to detect the bit rate
"– – –" appears.
Dialogue
Dialogue normalization information for Dolby
Digital and DTS signals.
Flag1/Flag2
Flag data encoded in Dolby Digital, DTS and PCM
signals that cue this unit to automatically switch
decoders.
Video Info. (Video information)
HDMI Signal
Type of the HDMI signals input or output at the
HDMI IN/OUT jacks of this unit.
HDMI Resolution
Resolution of the HDMI signals input or output at the
HDMI IN/OUT jacks of this unit.
Analog Resolution
Resolution of the analog signals input or output at the
video component jacks of this unit.
4
Press EXIT on the remote control to exit.
EXIT
MENU
PLAYBACK
45