Ryobi RBC30SESC Bedienungsanleitung Seite 20

Run position
Set the choke lever to "FULL" choke position.
Set the choke lever to "HALF" choke position.
Set the ignition switch to the "I" (ON) position.
Press the primer bulb 10 times.
Pull the starter grip to start the engine.
Squeeze the throttle lock and throttle trigger to run.
LOCK - lock the throttle in position by depressing the throttle interlock button
Waiting time 10 seconds.
To stop the engine, move the ignition switch to the "O" stop position .
Guaranteed sound power level is 111 dB.
EurAsian Conformity Mark
Ukrainian mark of conformity
Pull: Quick release tab
The following signal words and meanings are intended to explain the levels of risk associated with the product.
SYMBOLS
DANGER
WARNING
CAUTION
CAUTION
English (Original instructions)
SIGNAL
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
MEANING
18