Lfo 2 - Waldorf MicroWave XT Bedienungsanleitung

Symmetry
Adjusts the relationship between the rising and the falling edge of the signal. When set to 0
the generated waveshape is symmetrical. When set to positive values, the positive cycle
becomes longer and the negative cycle becomes shorter and vice versa. Use this parameter
to change to pulsewidth of the square signal. When using it on a triangle waveshape, you
can get a sawtooth wave with a soft rising or falling slope. The following diagram illustrates
this effect:
Level
Symmetry = 0
Humanize
Allows one to add a random variation to the LFO speed. When disabled, the LFO remains
at its initial speed, preset by the Rate parameter. Low settings add a human touch to the
sound, high settings are useful when creating effect sounds with an irregular character e.g a
wind sound where the filter frequency is modulated by an LFO. The following diagram
shows the effect of the Humanize setting:

LFO 2

The second LFO offers the same functionality as the first one. In addition it can be linked
with LFO 1.
LFO 2 / 1
LFO 2 / 2
Rate
Determines the frequency of the generated signal.
User's Manual MicroWave II • MicroWave XT • XTk
-64...+63
Level
Time
off / 1...127
Level
Humanize = off
Rate
028
Symmetry |Humanize | Phase
+27
0...127
Level
Time
Symmetry = +40
Level
Time
Humanize = 127
| Shape |
|triangle |
| 003 |
Time
Symmetry = -40
Time
Delay | Sync
005 | off
090
79