Waldorf MicroWave XT Bedienungsanleitung Seite 50

Here are some examples of useful parameter sets for the Play Access page.
Example 1
Example 2
Example 3
Example 4
Please note that the Play Access setting is stored in the sound program like the other
sound parameters. Therefore you must save your program even if you only changed
the Play Access definitions. By handling them as part of a sound, you will get the
chance of having different settings for each program.
Accessing the previously defined parameters
This is how you access the selected parameters in the Play Access page:
1. Press the Play button
Play Access page. The display now shows:
2. You can now use the value dials
Please note that – like any usual edits – you have to store your modified program to
make the changes permanent.
50
Par #1 | Par #2
F1 Cutoff|F1 Reso
Par #1 | Par #2
W1 StartW|W2 StartW|Mix Ring |Glide
Par #1 | Par #2
ArpActive|Arp Tempo|Arp Clock|Arp Patt.
Par #1 | Par #2
Effect | Assign
twice to switch back to performance mode and call the
F1 Cutoff|F1 Reso
092 | 000
to change each parameter's value.
User's Manual MicroWave II • MicroWave XT • XTk
| Par #3 | Par #4
|F1 EnvAmt|FE Decay
| Par #3 | Par #4
| Par #3 | Par #4
| Par #3 | Par #4
|Panning |Glide
|F1 EnvAmt|FE Decay
| +29 | 084