Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Power Switching; Powering Up; Switching Off - Waldorf MicroWave XT Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MicroWave XT:
Inhaltsverzeichnis

Werbung

Operation

Power Switching

The MicroWave II/XT/XTk is equipped with a software-based power control, which means it
is initially in standby mode when you supply the device via the AC adapter.

Powering up

Press the Power button
go out.
First, the version number of the MicroWave II/XT/XTk's operating software will appear in
the display:
After several seconds, the display will change to show the sound program; the MicroWave
II/XT/XTk is now ready to be played.

Switching off

The MicroWave II/XT/XTk has a special shutdown feature, that prevents data loss by acci-
dently pressing the power button. When you want to switch off the power, press and hold
the Power button
After counting down to 0 the MicroWave II/XT/XTk will switch. If you release the Power
button
before, the shutdown process is cancelled.

Adjusting the Master Volume

You can use the rightmost value dial
via the Main Vol. parameter. This setting is global and therefore valid for all programs.
The MicroWave XT and XTk has a dedicated Main Volume rotary control
used to setup the overall volume. Unlike the other dials, this control is made of a
potentiometer. Adjusting the volume directly affects the global Main Vol. parameter.

Selecting Programs

The MicroWave II/XT/XTk has an internal memory, which is is divided into two different
types of locations:
• 256 Sound programs (Program A001...B128)
In a Sound program, the MicroWave II/XT/XTk can play one sound at a time.
• 128 Multi programs (Program 001...128)
In a Multi program, the MicroWave II/XT/XTk can play up to 8 Sounds
(Instruments) simultaneously, each with individual settings.
All memory locations are freely programmable, so there is no separation into preset and
user programs.
User's Manual MicroWave II • MicroWave XT • XTk
to switch on the MicroWave II/XT/XTk. The Standby LED will
Waldorf Microwave XT
compiled Wed Aug 11 12:29:17 MET 1999
again. The display now shows a countdown message from 10 to 0:
[Switching myself off
Saw Repeat
Version 2.18
8]e
|Main Vol.
WMF |
Sound
|
to adjust the MicroWave II/XT/XTk's master volume
100
, that can be
23

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

XtkMicrowave ii

Inhaltsverzeichnis