Inhaltsverzeichnis
Werbung
Modifier Delay
Control Delay Time
Determines the time for which the modulation signal is delayed.
Source
Selects the modulation source whose signal is used as input for the delay line.
Modifier Units
Modifier 1...4
Source #1
Selects the first source signal used for the calculation. Table 2 shows all possible settings.
Source #2
Selects the second source signal when two sources are required for the calculation. See
description of modifier functions for further details. The possible settings are the same as for
Source #1.
Type
Determines which kind of operation will be performed on the selected input sources. The
following types are available:
The result of a modifier operation always lies within the range - 1...0...+1 . When it is
assigned to a parameter in the Modulation Matrix, it is scaled to the range of the selected
parameter.
82
Control Delay Time | Source
047
0...127
see Table 3
Source #1|Source #2|
LFO1
see Table 3
see Table 3
see Table 4
Setting
Description
+
Addition
-
Subtraction
*
Multiplication
/
Division
XOR
Exclusive OR function
OR
OR function
AND
AND function
S & H
Sample & Hold
Ramp
Triggered ramp
Switch
Switch
abs value
Absolute value
min value
Minimum value
max value
Maximum value
lag proc.
Ramp function
filter
Low pass filter
diff.
Differential function
Table 4: Modifier functions
|FilterEnv
Type
|Control X|
User's Manual MicroWave II • MicroWave XT • XTk
|Parameter
+
|
025
Werbung
Inhaltsverzeichnis
