Edit Buffers; The Compare Function - Waldorf MicroWave XT Bedienungsanleitung

Turning the dial clockwise selects the next page, turning it counterclockwise selects
the previous page.
4. Use the value dials
Turning a dial clockwise increases the corresponding value, turning it
counterclockwise decreases it. The dials have a built-in dynamic response feature.
If you turn the control slowly, the value changes very smoothly, too. If you turn it
faster, it accelerates as well. This gives you the chance of adjusting the whole value
range in just one turn without losing accurate control when nessessary.
5. When you have finished all your edits you should save the program. Please read
the next topic for further information.
6. Press the Play key

Edit Buffers

Whenever you edit a Sound or Multi program on the MicroWave II/XT/XTk, the program is
internally copied to an edit buffer. When you use the Store function to save the edits, the
program is copied back from the edit buffer to the internal memory. The MicroWave
II/XT/XTk has 8 separate edit buffers, so you can edit up to 8 programs simultaneously
without storing them. The display shows an e after the program name for every program
that is actually in an edit buffer:
Edit Status
Note that all edit buffers are cleared when switching off the MicroWave II/XT/XTk. Use the
Store function as soon as possible after finishing your edits.

The Compare Function

The Compare function allows you to compare the currently edited sound to its original
stored in the internal memory.
User's Manual MicroWave II • MicroWave XT • XTk
to adjust the corresponding parameters in the display
Sound / Multi
to return to the Play mode:
Play
Shift
Play Sound A001e |
Saw Repeat WMF
Instrument
Mode |Main Vol.
| Sound | 100
:
27