Inhaltsverzeichnis
Werbung
Arpeggiator
An arpeggiator is a device that splits an incoming MIDI chord into its single notes and
repeats them rhythmically. Different sequence modes can be defined for the arpeggiator to
cover a wide range of applications.
In addition to the synthesis features, the MicroWave II/XT/XTk offers a separately
programmable arpeggiator for every sound program. The arpeggiator can be used
independently or synced to MIDI clock. It can play a wide range of different rhythm
patterns, including a user programmable.
The arpeggiator uses an internal buffer that can store up to 20 notes. The buffer is cleared
each time a new chord is played. There are two ways of entering a chord:
• Press all keys of the chord simultaniously.
• Press and hold the first key of the chord. While holding this key, enter the other
keys sequentially. After playing all keys, release the first key again. On one hand
this method is practicable for playing difficult chords, on the other hand it is
essential when using the as played setting of the Direction parameter. This setting
allows you to create arpeggios in the sequence of played notes.
When you use the sound as part of a multi program, you can either use the sound's
arpeggiator described here, or the dedicated arpeggiator of the multi program's
instrument. Use the instrument parameter Arpeggiator Active to select which one to
use. As a default the sound's arpeggiator is not activated and therefore no arpeggio
will be generated when turning on the arpeggiator here.
Arpeggiator 1
Arpeggiator 2
Arpeggiator 3
Arpeggiator User Pattern
Active
Enables or disables the arpeggiator or activates the hold mode. When hold is activated,
incoming MIDI chords generate continuous arpeggios even when the chord is released. The
MicroWave II/XT/XTk will continue to do so until you play a new chord or this parameter is
set back to off or on . You can also stop the arpeggiator by performing the panic function or
sending an All Notes Off message from your sequencer.
68
Active
|
Tempo
on
|
126
Pattern |Direction|NoteOrder|Velocity
on
|alternate|as played|last note
Reset on Pattern Start
off
Position | Trigger
03
|
on
off / on / hold
|
Clock
|
1/16
[*-*--**-]
User's Manual MicroWave II • MicroWave XT • XTk
|
Range
|
04
| Length
|
08
Werbung
Inhaltsverzeichnis
