Inhaltsverzeichnis
Werbung
This is how you use the Compare function:
1. Press and hold the Shift key
2. Briefly press the Compare key
3. Release the Shift key
4. The display now shows a c after the program name:
Compare Status
You will now hear the unedited version of your program when you play your MIDI
keyboard.
5. Briefly press the Compare key
6. The c in the display changes to e again. The edited version of the program is now
active again.
Please note that no parameters can be edited when the Compare function is active.
You can only view the original settings. If you select a new program while the
Compare function is active, the Compare status is automatically terminated.
Recalling Edits
You can void edits at any time and return to the original program.
This is how you recall an edited program:
1. Press and hold the Shift key
2. Briefly press the Recall key
3. Release the Shift key
4. The e or c in the the display after the program name is cleared.
All edits have been recalled and the program is back in its original state.
Storing Programs
After you have finished editing a program, you must save it if you intend to use it again. All
memory locations of the MicroWave II/XT/XTk are available for this purpose.
This is how you store a program:
1. Press and hold the Shift key
2. Briefly press the Store key
3. Release the Shift key
4. The display shows a page where you can select the store type, the source and the
destination:
Store
28
.
.
.
Play Sound A001c |
Saw Repeat WMF
while holding the Shift key
.
.
.
.
.
.
Store
Sound
Saw Repeat
User's Manual MicroWave II • MicroWave XT • XTk
Mode
|Main Vol.
|
Sound
|
100
again.
A001
A001
WMF
?
Werbung
Inhaltsverzeichnis
