Herunterladen Inhalt Inhalt Diese Seite drucken

Arpeggiator - Waldorf MicroWave XT Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MicroWave XT:
Inhaltsverzeichnis

Werbung

Lowest Velocity
This parameter allows you to limit the velocity range in which the instrument is played.
Only notes with a velocity higher or equal to the selected value are passed through. Set this
parameter to 1 , if you want to turn velocity switching off.
Highest Velocity
Counterpart to the Lowest Velocity parameter. Only notes with a velocity lower or equal
to the selected value are passed through. Set this parameter to 127 , if you want to turn
velocity switching off.
Lowest Key
Equivalent to the velocity switching parameters, you can restrict the key range used for the
instrument's tone generation. Only notes with a key number higher or equal to the selected
value are passed through. Set this parameter to 0 if you want to use the full keyboard range.
Highest Key
Counterpart to the Lowest Key parameter. Only notes with a key number lower or equal
to the selected value are passed through. Set this parameter to 127 if you want to use the
full keyboard range.

Arpeggiator

Every Instrument in a Multi mode program is capable of using its own arpeggiator. The
settings made in this section override the settings defined in the Instrument's Sound
program. All Instruments will use the tempo setting defined in the Multi Arpeggiator
Tempo parameter, because it makes no sense to use different settings for each Instrument.
Alternatively, you can use the original settings of the Sound program by using the
corresponding option in the Active parameter.
Arpeggiator 1
Arpeggiator 2
Arpeggiator 3
Active
Enables or disables the arpeggiator or activates the hold mode. When hold is activated,
incoming MIDI chords generate continuous arpeggios even when the chord is released. If
Sound Arp is selected, the arpeggiator uses the settings defined in the Sound program that
builds the instrument.
Clock
Determines the note value for whole notes to thirty-second notes. The basis is a 4/4 beat.
Triplets (e.g. 1/8T ) and dotted notes (e.g. 1/16. ) are available for every value.
90
1...127
1...127
0...127
0...127
Active
|
Clock
Sound Arp|
1/2
Pattern |Direction|Note Order
off
|
up
Velocity | Reset on Pattern Start
root note|
off
off / on / hold / Sound Arp
1/1...1/32
|
Range
|
02
| by note
User's Manual MicroWave II • MicroWave XT • XTk
Inst. #1
Inst. #1
Inst. #1

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

XtkMicrowave ii

Inhaltsverzeichnis