Inhaltsverzeichnis
Werbung
Modulation Matrix
A modulation can be described as influencing a sound parameter by a signal generating
unit. The terms used in this context are "source" and "destination". The MicroWave II/XT/XTk
offers 16 independent modulation units each with individual settings of source, destination
and amount.
Mod 1...16
Source
Defines the modulation source. See Table 3 for the list of available sources.
Amount
Determines the amount of modulation applied to the destination. Since the modulation is
in fact a multiplication of the source signal and this parameter, the resulting amplitude
depends on the type of modulation source you select:
• For the so-called unipolar modulation sources, the resulting amplitude lies within
the range of 0...+1 , if Amount is positive or 0...-1 , if Amount is negative. These
sources are: Filter Envelope, Amplifier Envelope, Wave Envelope, all MIDI
controllers including Modwheel, Foot control etc., Velocity, Release Velocity,
Aftertouch, Polyphonic Pressure and MIDI clock.
• For the so-called bipolar modulation sources, the resulting amplitude lies within
the range of -1...0...+1 . These sources are: Free Envelope, both LFOs, Keytrack,
Keyfollow and Pitchbend.
For the modulation sources Keytrack and Keyfollow, a value of +56 represents 100% of the
scale.
User's Manual MicroWave II • MicroWave XT • XTk
Source
| Amount
Modwheel |
+047
see Table 3
-64...+63
| Destination
| Wave1 Pos
[5]
85
Werbung
Inhaltsverzeichnis
